'Stamp duty' is a quite strange tax system. A piece of paper (document) that you have created will be taxed.
It is easy to capture the information of income tax or liquor tax, but it is taxing every document from "contracts of top secret" to "a receipt of the tavern". There is no guarantee that they are taxing properly on the documents of huge amount. And the tax audit to ensure the fairness will cost enormous. The Dutch who invented this tax in the 17th century could never have thought that it would continue to exist until the 21st century.

In Japan, it was introduced in 1873, and it has been going on for 140 years thereafter. And even in the 21st century, in many companies they are pasting things like a postage stamp to the documents and then stamp cancellation mark. It is so cumbersome. 200 JPY for each piece of receipt of more than 30,000 JPY, 200 JPY for each volume of bank book, 4000 JPY for each copy of Basic Contract agreement... And every year, more than 1 trillion JPY of stamps are sold throughout Japan.

# If you have not seen a revenue stamp ever, go to a restaurant or a tavern to spend more than 30,000 JPY, and ask for a receipt. They will give you a receipt stuck a thing like postage stamps (200 JPY stamp) in any store.

However, the types of the documents are complicated. That is, of which '20 Classification of documents' each document falls under? How much stamp they should affix after all? Contracting officers of the company must refer to the website of the National Tax Agency again and again. But it won't be that easy. What is written there is esoteric. (cannot be helped because there is a need to explain documents of all types comprehensively)

[Stamp and shipment flow]

Are you capable to answer sufficient information quickly to inquiries through 'Inquiry Form'?

The inquirer may have a 'large anxiety'.
The inquirer may have a 'large expectation'.

You might be able to ensure a certain quality of supporting in 'Inquiry Form' or 'Inquiry Email' by devising procedures in the team, while 'Telephone Support' highly depends on the ability of the person.

In the following setting sample of Business Process, it will start 'Inquiry Response flow' automatically when;
  • a question is submitted through the 'Contact Us form' in the Web page,
  • an email comes in at the email address for Contact Us that has been published here and there.
That is, automatically starting 'Inquiry Handling' by a team.

If the question was simple, the answer is prepared and the operation is completed soon after the Workflow was started. For a higher difficulty level question, only the primary response will be sent and advice request is routed to the R & D department, etc.. In either of the cases, all the inquiry will become obvious about 'Who is taking care of' and 'What state it is in' or 'How it is discussed', by managing the Inquiry Handling in Workflow system. Needless to say, visualizing the "Progress" leads to 'speeding up' and 'raising the quality'.

[Inquiry Response flow]

It is difficult to design 'an ad hoc Process'. (Or, it is difficult even to understand what this means.)

"Ad hoc" in other words, 'not decided how and by whom it should be treated'. In terms of the Business Processes, for example it is an operation despite you know there exist three processes, in some cases these processes would be handled in order of [Process A] - [Process B] - [Process C], but in other cases [Process A] and [Process B] would be handled simultaneously after [Process C] has been processed. Originally meaning of the [ad hoc] is "non-repetitive" or "non-permanent".

Even though it may be a little confusing,,,
First of all, BPMN as 'notation of Business Process Diagram' has a mission to well-define 'a Business flow of repetitive and predefined'. But in the other hand, BPMS (BPM System) as a 'Business system', should manage all the business progress (whether repetitive or not). After all, it is very hard for BPMS how to handle 'a Business flow unlikely to pre-defined'.

In Questetra, it is devised to handle such ad hoc processes by 'ganging up'. That is, it is a concept that 'putting multiple Tasks together as one, and handling it with everybody'. Specifically, it is trying to solve it by providing a cooperative work by the following three functions. In fact, this is the point which attracts attention from IT research companies and IT society.
  1. [Team Task], which is available for multiple people to discuss. (Tasks on a Team Swimlane)
  2. Discussion type data (Special text type datya item which concerning people can continue to append the time-stamped comment)
  3. Enterprise Social Networking (Posts that tagged the Process ID will be associated with the Process)

[Investment Decisions flow]

10 Tips for Selecting BPM Products

Monday, September 9, 2013
"a BPM Product" = "a Workflow Product" + {Helpful Features}

That isn't wrong. Yeah, that is right. A "BPM Product" is a "Workflow Product" as well. (On the other hand, it is hard to say '"a Workflow product"is "a BPM product"'.)
As the IT Research company Gartner, pointing out in "Component of a Business Process Management Suite", the core of a BPM product is 'Workflow Engine (Process Execution and State Management Engine)'. That is, a BPM Product always includes Workflow function.

  1. Process Execution and State Management Engine
  2. Model-Driven Composition Environment
  3. Document and Content Interaction
  4. User and Group Interaction
  5. Basic Connectivity
  6. BAM and Business Event Support
  7. Simulation and Optimization
  8. Business Rule Engine
  9. System Management and Administration
  10. Process Component Registry / Repository

However in fact, there is a difference in supporting 'type of Workflow diagram' between "BPM Products" and "(conventional) Workflow Products ".


[Publicity Production flow]

'Daily Report', which is always indispensable for Sales section or Procurement section.
It is a framework that to summarize the day's results and impressions, and to be submitted to the manager every day. It is a very effective method to share information for certain type of business. It is convenient for who submits the report as well as who leaves comments because they can handle in the daily cycle.

However, in the other hand this Daily Report will not be read by other than the managers. Though it is the precious live information... Though it is the precious record... it is nothing but wasteful.

The following [Interview Report flow], an example of Reporting flow, the frequency of the report is assumed as 'whenever' instead of 'Daily'. So the title of the report will be "AAA.,Inc 20yy. mm, dd" instead of '20yy. mm. dd personnel name'.

By doing this, it will be easy to refer when you search for 'Name of Customer'. When you search for 'Name of Customer' over the whole Workflow system, not only history information stored in [Interview Report flow], you can browse history information also in [Order flow] or [Estimate flow].
It will allow an Accounting personnel to quickly reference contact record of the past when he or she had suspicion on the invoice from the outside. It will allow management to obtain information of time series such as from the initial contact, to Estimation work, Contract processing and to Billing.


[Interview Report flow]

When you define a flow of an operation, you will need a little skill to set '[S: Start point] and [E: end point] of the Business process'.

For example in an "Inquiry flow", it should start with 'S: Accepting the Inquiry' and should end at 'E: Sending the Answer'.
Also in a 'Billing flow', it should start with 'Inputting Billing data' and should end at 'E: Payment Confirmation'.
Settings on these Workflow are not so controversial.

However there will be a lot of objections, suppose if I define a long process into a 'single Business Process', such as from 'S: Lead corresponding' through 'Estimate, Orders' and 'Manufacturing' then ends at 'E: Payment Confirmation'. Most of all, the flow diagram is complicated, the work process becomes difficult to read. Moreover, the number of items in the "business data" become also large inevitably, data required for processing becomes difficult to see.

The simplest solution is a method that [(A) Managing in Dividing into Phases].

Figuratively speaking a sequence of operations as the "bullet train from Tokyo to Osaka", it is to manage in dividing into '(1) Tokyo to Nagoya' and '(2) Nagoya to Kyoto' and '(3) Kyoto to Osaka'. That is, each designer defines important parts in each phase. It will be easy to imagine if you think about operations that the project itself is prolonged such as "construction work" or "writing a study thesis". Dividing phases at the point where changing the person (departments in charge) involved, would be the royal road.

Another solution is a method that [(B) Managing in Dividing into Simple cycles].

Speaking in the "bullet train from Tokyo to Osaka", to consider this as repetition of a simple Business Process of "Departure and Stop". The general versatility will become quite high, also the operating procedures will be recorded in detail. At the same time (as in the general theory though), it will become difficult to overview the "whole thing".

[Departure-Stopping flow]

"Okay, I have completed the introduction of Google Apps!"
"Now, I would like to inspect for Workflows which I can log-in with my Google Apps account!"

Recently, business systems for corporation are 'Cloud-computerized' for sure.
That means, they are shifting to 'pay per use'. Information Technology has come on a same history, just like water service, gas, and electricity. What's remarkable is the diversification and dissemination of SaaS product. It has greatly reduced labor of purchasing software or upgrading. The world has become convenient, indeed.

  • Cloud-based Groupware (Email + Calendar + ...)/ Office Suite (Wordprocessor + Spreadsheet + ...): Google Apps, Microsoft Office 365、IBM SmarterCloud (former LotusLive), so on...
  • Cloud-based CRM (Customer Relationship Management): Salesforce, Microsoft Dynamics CRM, Synergy!, ZOHO CRM, so on...
  • Cloud-based ERP (Enterprise Resource Planning): AP, Oracle, NetSuite, so on...

"Okay, testing environment for Workflow is ready!"
"Now, let it flow actual business data (jobs), and see how good it is!"

People tend to testing by flowing 'meaningless test data' on a 'meaningless Workflow'. But it won't make you feel real. It won't provide worthy evaluation. You will lose the chance to test the functions which you would need in actual operation, like 'I think I need a remark written here...'

The following is a business template, 'Suggestion-box flow', which is despite (1) a Workflow that does not exist so much (so, not overlapping), (2) will make you feel real, and (3) might be good to continue to use even in the actual operation by chance. An idea of new business might be suggested.

[Suggestion-box flow]